A nice Craig's List find and a critical piece for my fishyard transfer system:
Liberty Sump Pump 257: 1/3 hp 115V 5.2 amps 60Hz,
50 GPM @ 0 and 40 GPM@ 8 Feet.
American Made!
Here's a video the seller posted. Can't wait to drain a 300 gallon tank and relocate the water in 6 or 7 minutes!
He shipped it from a few hours drive away for $13.
Hardly any run time. Can't wait to draina 300 gallon tank and relocate the water in 6 or 7 minutes!
Liberty Sump Pump 257: A nice Craig's List find. He shipped it from a few hours away for $13.
Libery Pumps Model 257 Submersible Sump Pump w/ VMF Switch
Libery Pumps Model 257 Features:
- Rugged 1/3 hp motor, oil filled with thermal overload protection.
- 1/2" solids handling.
- 1-1/2" discharge.
- Hermetically sealed motor and switch cavities, and permanently lubricated bearings.
- Liberty’s UNI-BODY casting – a solid, one piece housing that eliminates the lower motor seal ring found on other pumps.
- Epoxy powder coat finish
- Vortex style impeller for superior solids-handling. Made of high temperature engineering polymer.
- Carbon and ceramic shaft seal.
- Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor. (25' length optional) For 25' cord option, add a “-2” suffix to model number. Example: 257-2 for Model 257 with 25' cord.
- VMF switch, (Vertical Magnetic Float) for smaller pits down to 10" diameter.
- Fasteners – all non-corrosive stainless steel.
- 416 stainless steel rotor shaft.
- 2 YEAR LIMITED WARRANTY
Libery Pumps Model 257 Motor Specifications:
- 1/3 hp 115V 5.2 amps 60Hz
- Thermally Protected & Permanently Lubricated
- Maximum Fluid Temperature: 140°F
Libery Pumps Model 257 Dimensional Data:
- Weight ----- Model 257: 22 lbs.
- Height ----- 10.5"
- Major Width ----- 9.6" (manual model 250)
